SAFETY RATED FLASHLIGHT This feature-laden, safety approved flashlight was designed to meet the stringent requirements of ANSI/UL 913 CAN/CSA C22.2 No. 157-92 intrinsically safe equipment for use in hazardous locations.
Λεπτομέρειες
| High-performance, anti-static, thermoplastic material resistant to chemicals and solvents |
| “Captured locking” set screw will not back out -prevents FOD (Foreign Object Debris) |
| Safety measure: Set screw helps to avoid batteries being changed out, or the housing inadvertently being opened in a hazardous environment |
| Set screw goes into a metal tray that evenly distributes pressure to protect the body from over-tightening of the set screw |
| Combination of visual and mechanical polarity protection ensures correct installation of batteries |
| Light designed to not power on if batteries are installed incorrectly |
| 3 “AA” alkaline batteries reduce battery and recycling costs by 25% |
| C4® LED technology – impervious to shock with a 50,000 hour lifetime – provides 120 lumens; runs 6.5 hours |
| Sealed switch design protects it from corrosion caused by battery leakage |
| One body electronic LED module mechanically attached to electronic assembly |
| Smooth parabolic reflector produces a tight beam with optimum peripheral illumination |
| Regulated run time provides consistent performance throughout battery life |
| O-ring sealed, dust-proof, water-tight enclosure |
| IP67 rated for dust-tight and waterproof to 1 meter for 30 minutes; IPX4 for water spray |
| 3 meter impact resistance tested |
| Ergonomically designed for maximum hand comfort |
| 7.00 in. (17.78 cm); 7.5 oz (213 grams) with batteries (included) |
| Limited Lifetime Warranty |
| Assembled in the USA |
